When we look at a finished skyscraper or a new bridge, we tend to focus on the gleaming glass and the solid steel. However, none of those permanent structures would exist without a massive, complex network of temporary structures that supported them during construction. From the scaffolding that allows bricklayers to reach the upper storeys to the massive earthworks shoring up a deep basement, temporary works are the unsung heroes of the building world. But because these structures are temporary, they are often where the most significant risks lie. That is exactly why the role of a Temporary Works Coordinator is so vital to the modern construction industry.
Temporary works are defined as any part of a construction project that is needed to enable the permanent works to be built. They are not intended to stay there once the job is done, but while they are in place, they must be just as safe and stable as the final building. If a scaffold collapses or a trench caves in, the consequences are devastating. To prevent these disasters, the UK construction industry follows a strict set of procedures, primarily governed by the British Standard BS 5975. Central to this standard is the requirement for a competent person to oversee the entire process, ensuring that designs are followed and safety is never compromised.

What does a Temporary Works Coordinator actually do all day
A lot of people think that a Temporary Works Coordinator is just someone who signs off on scaffolding, but the role is far more expansive than that. They are the central hub for communication between the permanent works designers, the temporary works designers, the site management team, and the contractors physically installing the equipment. Their primary job is to ensure that a robust procedure is in place and, more importantly, that everyone is actually following it.
On a typical day, a coordinator might be reviewing a design for a complex crane base in the morning and inspecting a propping system in a basement in the afternoon. They are responsible for making sure that every piece of temporary work on-site has been properly categorised by risk, designed by a competent person, and checked by someone independent of the original designer. This level of oversight is what keeps a site running smoothly and, ultimately, keeps the workers safe.
Managing the temporary works register
One of the most important tools in their arsenal is the Temporary Works Register. This is a living document that lists every single item of temporary works on the project, no matter how small. It tracks the progress of each item from the initial requirement through to design, installation, and eventually, removal. The coordinator uses this register to ensure nothing slips through the cracks. It usually includes details such as:
- The specific location and description of the works.
- The risk category (Class 0 to Class 3).
- Who is responsible for the design and the independent check.
- The dates for the permit to load and the permit to unload.
- Records of inspections and maintenance.
Coordinating between designers and site teams
Miscommunication is one of the biggest causes of site accidents. A designer might create a perfect plan for a cofferdam, but if the site team decides to change a single strut because it is in the way of an excavator, the entire structural integrity could be compromised. The coordinator acts as the gatekeeper. They ensure that the site team understands the limitations of the design and that any changes are referred back to the designer for approval before they are implemented.
The legal side of things and BS 5975
In the UK, the Health and Safety Executive (HSE) takes temporary works very seriously. Following the high-profile failures of the past, the industry adopted BS 5975 as the code of practice for temporary works procedures. While it is a recommendation rather than a law, failing to follow its principles is often seen as a failure to meet the broader requirements of the Construction (Design and Management) Regulations 2015 (CDM 2015).
The standard outlines exactly how a company should manage its temporary works, including the appointment of a Designated Individual (DI) who then appoints the coordinators. This hierarchy ensures that there is clear accountability from the boardroom down to the site floor. For someone working as a Temporary Works Coordinator, understanding these legal obligations is just as important as understanding the engineering behind the structures. They must be able to prove that they have followed the correct procedures if an inspector ever visits the site.
Why you cannot just skip the training for this role
You might be an experienced site manager with twenty years in the industry, but that does not automatically make you a competent coordinator. The role requires a very specific set of skills that blend technical knowledge with administrative discipline. This is why formal training is almost always a requirement for anyone stepping into the position. Most major contractors in the UK will not allow someone to act in this capacity unless they have completed a recognised industry course.
Training helps a coordinator understand the nuances of risk classification and the importance of independent design checks. It also teaches them how to manage the human element—how to say ‘no’ to a project manager who is pushing to load a structure before the permits are signed. It provides the confidence needed to halt works if things aren’t looking right, which is often the hardest part of the job. Some of the key topics covered in professional training include:
- The roles and responsibilities of all parties involved in temporary works.
- Detailed walkthroughs of the BS 5975 procedural controls.
- How to create and maintain a comprehensive Temporary Works Register.
- The practicalities of issuing permits to load and permits to dismantle.
- How to identify potential failure points in common temporary structures.

The daily challenges a coordinator faces on site
Being a coordinator is not just about paperwork; it is about problem-solving in a fast-paced environment. One of the biggest challenges is the sheer variety of work. On a single project, you could be dealing with everything from site hoarding and fencing to complex facade retention and heavy-duty propping. Each of these requires a different level of scrutiny and a different set of specialist designers.
Then there is the pressure of the programme. Construction projects are often behind schedule, and there is always a temptation to take shortcuts to save time. The coordinator is often the person standing in the way of those shortcuts, insisting that a scaffold is inspected or that a concrete pour is delayed until the formwork is fully verified. It requires a thick skin and a high level of professional integrity. They have to balance the need for progress with the absolute necessity of safety, ensuring that every temporary structure is fit for purpose before it is put to use.
Another challenge is the management of sub-contractors. Many sub-contractors bring their own temporary works onto the site, such as mobile towers or specialist lifting gear. The coordinator must ensure that these third-party elements are integrated into the overall site plan and that the sub-contractors are following the same high standards as the main contractor. This involves regular site walks, checking equipment against designs, and ensuring that everyone on-site knows who to talk to before they make any modifications to a temporary structure.

Chloe is a journalist focused on music genres, artist evolution, and how global platforms have influenced listening habits. She highlights how music connects people across generations.

